Daiwa 25 Saltiga (G) 10000-H
Below is a freight estimate based off shipping this item to your post code. Actual shipping costs are calculated at the checkout & are based off Land & Sea shipping information.
Please enter your postcode for delivery estimate
*See our shipping page for full information our shipping policies both domestic & international
Product Description
Extreme spool volume. Heavy-duty line. Built to cross oceans.
The Daiwa 25 Saltiga 10000-H raises the bar for big-water spinning reels. With a large-frame body, high-capacity spool and high-gear ratio for quicker retrieval (approx 117 cm per turn), it's engineered for heavy braid, big poppers and long fights in open seas. Whether you're chasing , kingfish, broadbill, dogtooth tuna or tackling tough offshore structure, the Saltiga 10000-H gives you the superior line capacity, speed and rugged durability to dominate the deep game.
Why the Daiwa 25 Saltiga 10000-H?
- Massive Capacity: Large spool and body suit heavy braid and extended drags, perfect for long runs and deep charges.
- High-Gear Retrieval: High gear (5.6:1) gives faster line pick-up / quicker recovery, ideal for surface-bait, tuna feeding frenzies or multi-hook drags.
- Saltiga Reinforced Architecture: Monocoque body, Powerdrive gear system and Magsealed protection ensure rock-solid performance under extreme load.
- Heavy-Duty Drag & Line Handling: Built to manage intense pressure, with precision spool control and line lay for braid and heavy mono chemicals alike.
- Salt-water Tough: Magsealed tech and premium corrosion resistance let you keep fishing through seasons without performance drop-off.
- Fishing-Optimised Ergonomics: Soft Egg or AL-Round handle options, solid frame control and smooth operation tailor-made for big-fish gear rigs.
When you’re heading to the edge of the shelf, facing wide open zones, heavy current and fish that run hard, you want the Saltiga 10000-H in your hands. It’s not just built to fight, it’s built to win.
Equip it. Load heavy. Pull hard. Win hard.
Engineered Power and Performance.
The 25 SALTIGA is all muscle, designed to help you "BREAK YOUR RECORD" and capture trophy fish, cast after cast. With a gear over 10% larger than its predecessor, the 25 SALTIGA delivers unmatched strength and precision you can feel with every turn.
NO FAILURES. NO COMPROMISES.
When the pressure is on, 25 SALTIGA delivers. The one-piece MONOCOQUE BODY and MAGSEALED technology ensure superior water resistance, keeping out salt and impurities for consistent, reliable performance in all conditions.
CONTROL IN EVERY TURN.
The 25 SALTIGA is all muscle, designed to help you "BREAK YOUR RECORD" and capture trophy fish, cast after cast. With a gear over 10% larger than its predecessor, the 25 SALTIGA delivers unmatched strength and precision you can feel with every turn.
FISH HARDER. FISH LONGER.
When the pressure is on, 25 SALTIGA delivers. The one-piece MONOCOQUE BODY and MAGSEALED technology ensure superior water resistance, keeping out salt and impurities for consistent, reliable performance in all conditions.
Experience raw strength redefined with the POWERDRIVE ENGINE body unit. Featuring an OVERSIZED POWER DIGIGEAR and POWER ROLLER OSCILLATION system, it delivers unmatched winding power, smoothness and durability.
SIZE THAT COMMANDS PERFORMANCE
Built with G1 duralumin for exceptional durability, the MONOCOQUE BODY design accommodates a larger, thicker gear—10% larger and 6% thicker than the previous model. Precisely engineered gear teeth enhance drive efficiency, while minimal deflection ensures stable, consistent meshing. This reduces power loss, providing smooth and effortless winding performance.
SMOOTH UNDER PRESSURE
The redesigned two-ball bearing pillar support system enhances oscillation efficiency by 20%, ensuring smooth, responsive, and powerful winding, even under heavy loads. Frictional resistance is significantly reduced, providing reliable performance and ultimate control when tackling the strain of the largest fish in the ocean.
The redesigned TOUGH LINE ROLLER SYSTEM is enlarged to endure repeated heavy loads, and the updated design better integrates the screw with the bail arm. Removing joints at high-stress points enhances rigidity and durability around the line roller. The new line roller, optimised for PE braided lines, reduces sliding resistance by approximately 3%.
POWER MEETS PRECISION
The new POWERDRIVE ROTOR is engineered for strength and efficiency. Crafted to handle the heaviest loads, this rotor delivers superior stability, allowing anglers to pull in the largest of fish with ease. The unique shape, which appears as though it was cut from a sphere, maintains low inertia and has an increased rigidity of 7%. The POWERDRIVE ROTOR ensures that each turn of the handle translates into a smoother, more powerful retrieve, even under extreme pressure.
ALWAYS IN CONTROL
The new crank-shaped design directs the line smoothly to the line roller without fail. The redesigned shape and spring mechanism enhance opening and closing angles, preventing unintentional bail movement. This improvement significantly enhances line feeding to the roller, especially during jigging and while the line is tensioned.
This is used for Models 18000 and above. Drags that use carbon washers are highly durable, but DRD takes it to another level with a new drag mechanism designed to target larger fish. With eight metal rollers on a single metal plate, DRD controls the loss of drag force caused by frictional heat. It is smooth under pressure and is 5x times more durable.
This is used for Models 14000 and below. The ATD TOUGH DRAG delivers exceptional drag strength and smoothness. The large carbon drag stack provides anglers with the ultimate in smooth performance and reliability.
RIGID ONE-PIECE BODY.
DAIWA’s “LC-ABS SW” technology enhances power and rigidity. The spool’s upper section is optimised with a two-step taper toward the spool ring, minimising friction for smoother line release. Its narrow width prevents tangling, even during the final stages of casting with less line remaining. This design ensures smooth casting with thick lines and improves casting distance by approximately 2%, providing anglers with an improved casting experience.
The redesigned TOUGH LINE ROLLER SYSTEM is enlarged to endure repeated heavy loads, and the updated design better integrates the screw with the bail arm. Removing joints at high-stress points enhances rigidity and durability around the line roller. The new line roller, optimised for PE braided lines, reduces sliding resistance by approximately 3%.
POWER MEETS PRECISION The new POWERDRIVE ROTOR is engineered for strength and efficiency. Crafted to handle the heaviest loads, this rotor delivers superior stability, allowing anglers to pull in the largest of fish with ease. The unique shape, which appears as though it was cut from a sphere, maintains low inertia and has an increased rigidity of 7%. The POWERDRIVE ROTOR ensures that each turn of the handle translates into a smoother, more powerful retrieve, even under extreme pressure.
ALWAYS IN CONTROL
The new crank-shaped design directs the line smoothly to the line roller without fail. The redesigned shape and spring mechanism enhance opening and closing angles, preventing unintentional bail movement. This improvement significantly enhances line feeding to the roller, especially during jigging and while the line is tensioned.
| Model | Type | Ball Bearing | Max Drag | Gear (IPT) | PE Capacity | Weight | Knob |
|---|---|---|---|---|---|---|---|
| SALTIGA 8000-P (G) | Spin | 14/1 | 25 kg | 4.8:1 (94 cm) | PE 4–300 | 670 g | Aluminium Round |
| SALTIGA 8000-H (G) | Spin | 14/1 | 25 kg | 5.6:1 (110 cm) | PE 4–300 | 680 g | Soft Egg |
| SALTIGA 10000-P (G) | Spin | 14/1 | 25 kg | 4.8:1 (99 cm) | PE 5–300 | 675 g | Aluminium Round |
| SALTIGA 10000-H (G) | Spin | 14/1 | 25 kg | 5.6:1 (117 cm) | PE 5–300 | 685 g | Soft Egg |
| SALTIGA 14000-P (G) | Spin | 14/1 | 25 kg | 4.8:1 (102 cm) | PE 6–300 | 690 g | Soft Egg |
| SALTIGA 14000-XH (G) | Spin | 14/1 | 25 kg | 6.2:1 (133 cm) | PE 6–300 | 690 g | Soft Egg |
| SALTIGA 18000-H (G) | Spin | 14/1 | 30 kg | 5.5:1 (129 cm) | PE 8–300 | 920 g | Soft Egg |
| SALTIGA 20000-P (G) | Spin | 14/1 | 30 kg | 4.4:1 (111 cm) | PE 10–300 | 930 g | Soft Egg |
| SALTIGA 20000-H (G) | Spin | 14/1 | 30 kg | 5.5:1 (138 cm) | PE 10–300 | 930 g | Soft Egg |
| SALTIGA 25000-P (G) | Spin | 14/1 | 30 kg | 4.4:1 (121 cm) | PE 12–300 | 945 g | Soft Egg |
- Daiwa 25 Saltiga 10000-H (G) large-spool high-gear spinning reel
- Premium reel pouch & documentation packet
- Warranty card & registration information
- After saltwater use, lightly rinse with fresh water and dry. Avoid pressure-washing the rotor/bail area.
- Back off drag after trips to preserve the carbon stack.
- Periodically grease line roller and handle knob bearings; service as required to maintain Magsealed performance.
What types of fishing are best for the 10000-H?
Perfect for offshore jigging, heavy stickbaiting, live-bait drifts, and snapping large surface bites where heavy braid and long capacity counts. Very suited for tuna, broadbill, and deep structure threats.
How does the 10000-H compare with the 10000-P?
The H model features the same reinforced Saltiga platform but with a high gear ratio (Approx. 117 cm per turn) and larger spool capacity for heavier line. The P model focuses more on torque and heavier drag with slightly slower gear for deep-work.
What line rating is recommended?
Use PE 5-8 braid loaded to full spool capacity with a 60-100 lb mono/fluoro leader. Pair it with a 7'0"-8'0" offshore spin rod rated approx. 300-450 g for best performance.
Is the reel protected for saltwater use and deep runs?
Yes—Magsealed technology and Magsealed bearings help keep out salt and grit, and the Monocoque body protects structural integrity under hard loads. Standard maintenance still applies.
Where can I purchase the Daiwa 25 Saltiga 10000-H (G)?
Available from Land & Sea, both online and in-store: www.land-sea.co.nz.
More from Daiwa
Ratings Snapshot
Product Rating
Review this product
Adding a review will require a valid email for verification